Brooks Stairlift, Инструкция по установке и эксплуатации

Страница: 19 / 32

19
4. Loosen the 6 horizontal bolts (3 either side)
until the post can just move.
5. Adjust the seat to the correct angle
by placing a spirit level on the seat
post platform.
6. Ensure that the anti-slip clamps (butterfly
brackets) are in the correct horizontal
position. The serrated side should be facing
inward towards the carriage, with the smooth
side facing outward.
7. Tighten the 6 horizontal bolts using a
13mm socket torque wrench set to
35Nm.
8. Replace the carriage cover and replace
the two screws.
1.2.6 Setting Footrest Angle
1. Loosen the centre bolt and adjust to the
correct level using the spirit level.
Once level, tighten the bolt back up.
2. Return the footrest hinge cover
by replacing the screw.