Brookfield Industries NB-2000-HD2, Руководство по установке

Страница: 5 / 17

Door Position Setup and DAU Instructions
2. A “Please Wait” logo message will flash for a few seconds and then a selection
screen will show.
ʻ G, ʼ use the black cable, plug the opposite ROUND end into the PLC unit on the
operator. For ʻ G ʼ series and above, use the gray cable and plug the opposite
ROUND end into the receptacle on the end cover of the operator (right side).
Fig. 4 will display. For Main/Sub, select ʻ Lead Door ʻ or
ʻ Follow Door ʼ on the next screen (Fig. 5), then skip to step 5.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
4. Selecting Standard will give you the screen shown in Fig. 6. Choose the appropriate
serial number series of the operator, to get to the first preset screen (Fig. 7)
Fig. 6 Fig. 7
GT-01/02 Touch Screen
1.Plug the eight prong Phoenix Connector into GT-01/02. For operator series before
3.For GT-01/02 software prior to Ver. 3, the screen in Fig. 3 will display. Choose either
ʻ Standard ʼ or ʻ Main/Sub ʼ operator. For Ver. 3.7 of the GT-01/02 software, the screen in
NOTE: Check PLC model number for appropriate 'Main-Sub'
selection.