background image

 

 

WARNING! 

 

IMPORTANT SAFETY INSTRUCTIONS 

IMPROPER USAGE CAN LEAD TO SEVERE INJURY OR DEATH 

READ AND FOLLOW ALL INSTRUCTIONS 

 

 

Commercial/Industrial swinging door operator

 for trained traffic* use only.  The manufacturer of this product does not include 

external safety devices as a standard feature.  Since Entrapment shall be compliant with UL 325 Section 29.4, the addition of 
external safety devices on swinging door operators is considered redundant.  If external safety devices are to be added to this 
operator, refer to the Terminal Strip Hookup in this manual for proper wiring and to the owner’s manual of the external safety 
device manufacturer for proper installation and use.    

  No person shall perform any service or activate this door operator unless they have been properly trained in its safe usage and 

have read the owner’s manual. 

  Never let children operate or play with door controls. 

  Before activating this door operator, check the following: 

1.  Assure that all personnel are clear of the path of this operator and the door that it is attached to. 
2.  Assure that all fingers, hands, feet, limbs and articles of clothing are clear of all moving parts and pinch points. 

  Personnel should keep away from a door in motion and keep the moving door in sight until it is completely closed or open.  NO 

ONE SHOULD CROSS THE PATH OF A MOVING DOOR. 

  Test the door’s safety features at least once a month.  After adjusting either the force, speed or the limit of travel, retest the door 

operator’s safety features. Failure to do so may cause severe injury or death. 

  KEEP DOORS PROPERLY OPERATING AND BALANCED.  Refer to door manufacturer’s manual.  Have repairs done by 

trained technicians. 

  Prior to performing any service on this product (including the replacement of any fuses or circuit breakers), disconnect the 

operator from the supply voltage. 

  For continued protection against fire, replacement fuses or circuit breakers shall be of the same type and ratings as those being 

replaced. 

*Defined in ANSI 156.10 as a controlled group of people trained in the safe use and operation of a particular door installation. 

SAVE THESE INSTRUCTIONS 

Содержание NB-2000-HD2


















Отзывы: