BRONZE GYM MZM-008, Руководство пользователя

Страница: 21 / 24

17
3. Monthly Inspection
(1) Inspect main frame and press arms: lubricate the pop pin; inspect and
lubricate seat post; inspect all fastening parts.
(2) Inspect main frame and press arms: check if they are complete and work
normally; check if there’s cracking, peeling paint or rustiness. Repair or
replace the parts according to actual condition.
(3) Check if main frame is cracked. Pay special attention to solder joints. If
any crack, suspend the machine immediately and contact maintenance
staff to repair it.
(4) Check if there’s rust or peeling paint on frame; if yes, wipe it gently with
wet grainy cloth, dry emery cloth, or steel wire (fine thread) ball and then
repair paint chips.
(5) If the selector pin cannot be easily inserted into weight plate, check
whether the selector bar swings leftward and rightward when it's in
vertical position. (Picture 1)
(6) Pull out the pop pin; spray a small amount of silicon oil onto it; wipe it and
remove excessive oil. (Picture 2)
(7) The number of repetitions and workout duration can be displayed on rep
counter during exercise. If not, battery needs to be replaced. Remove
shroud, you can see an AAA battery, replace it with a new one. It’s
Inspect if screws are
tightened regularly.
Lubricate it regularly.
Rep counter
Picture 1 Picture 2 Picture 3
Selector bar