21
-
There are many others models such as Avila, Tudela, Sintra, Suiza, Suiza-Inox, Sena Plus, Soria and Oxford whose entry of air exists
but it is not adjustable (
see drawing D7
).
D7
D8
Double combustion
Some models of the stoves include a double combustion. With this system we
get a second preheated entry air inside the combustion chamber. This allows a
second combustion of the not burnt gases in the first combustion that achieves
a high performance efficiency, a great fuel saving and reductions in pollutant
emissions.
-
The models Sydney, Louvre, Preston, Derby and Bury have this air
intake control for the double combustion under the door, which is the
same than the secondary air intake control. This control is placed on the
right and the movement is from inside to outside and vice versa. The
operation to outside increase the air input (
see drawing D8
).
D9
-
There are many others models such as Ávila, Tudela, Vitoria, Soria,
Oxford, Etna, Croacia, Versalles, Valencia, Gijón, Gijón-H, Lerma, Lerma-H
and Ordesa whose entry of preheated air exists but it is not adjustable. The
air supply is usually made by little drillings on the back wall of the combustion
chamber (
see drawing D9
).
Triple combustion
In the model Dover and Fígaro, the regulation is located under the door to
the right, both the double and triple combustion. With this regulation open
(regulation completely extracted, outside), it is possible to introduce hot
oxygen twice into the combustion chamber, thanks to itineraries designed by
Bronpi. This combustion process designed by Bronpi makes the most of the
calorific power of the wood, while reduces the most harmful emissions as well as the consumption of wood.
Baffle plate
The baffle plate is a fundamental part for the proper operation of the stove. It must be placed in the right position and the stove must not be
used without the baffle plate. This would invalidate the warranty.
The combustion is not always stable. In fact, it can be affected by the weather conditions or the outside temperature. This modifies the draw
of the chimney. For this reason, our stoves have a baffle plate (or double baffle plate)
WARNING!
The lack of the baffle plate causes an excessive draw. This causes a fast combustion, excessive wood consumption and
the overheating of the equipment.
Due to safety reasons during the transport, in some models, the baffle plate is not assembled. You will find it inside the combustion chamber.
To place it properly, follow the next steps:
Frontal models:
Corner models :
D11
D10
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
STOVES
EN
