brondell S1200-EW, Руководство пользователя

Страница: 24 / 112

22
Adjusting Water Temperature
Press the Water Temp. button to adjust temperature to desired level. There are four temperature
levels indicated by the Seat Temp. Indicator light
on the remote:
Off - incoming water temp., Low - 90° F (blue), Medium - 95° F (pink), High - 100° F (red)
Auto Function
The Auto Function will run a preset wash and dry cycle* with a simple press or hold of the “Auto”
button.
Pressing the Auto button will initiate a rear wash cycle for 90 seconds at the medium (pink) water
temperature. The water pressure will be set to high and the spray width will be on the medium
(pink) setting. The oscillate function will start as soon as the wash cycle starts. The Swash will
automatically start the Air Dryer* and run a dry cycle* for 2 minutes immediately after the wash
cycle. The Dryer temperature* will be set to medium.
Press and hold the “Auto” button for 5 seconds to initiate a Front Wash cycle for 90 seconds
at the medium (pink) water temperature. The water pressure will be set to high and the spray
width will be on the medium (pink) setting. The oscillate function will start as soon as the wash
cycle starts. The Swash will automatically start the Air Dryer* and run a dry cycle* for 2 minutes
immediately after the wash cycle. The Dryer temperature* will be set to medium.
Press Stop on the remote anytime during the wash or dry cycle* to stop the Auto Function.
In “Auto” mode, the seat temperature will be unchanged; it will be set to whatever the last seat
temperature setting was. The deodorizer will not turn on during the Auto Function.
Wide Spray
To adjust the spray width of the washing stream during a wash cycle, press the Wide Spray
button. The Wide Spray button has three levels indicated by the Wide Spray Indicator Light on the
remote control:
Concentrated Stream (blue), Medium Stream (pink), Wide Stream (red)
Increasing the spray width to the Medium and Wide settings will also decrease the spray pressure.
USING THE SWASH 1200/1400 (cont.)
OPERATING THE SWASH (cont.)
Adjusting Seat Temperature
Press the Seat Temp. button to adjust the seat temperature to desired level. There are four
temperature levels indicated by the Seat Temp. Indicator light on the remote:
Off, Low - 89° F (blue), Medium - 93° F (pink), High - 97° F (red)
NOTE:
• The Warm Air Dryer is only available on the Swash 1400 model