4
Attention:
Read before starting up the power pack
-
Prior to replacing fuses, modelling lamps or flash tubes, discharge the power pack
and disconnect from power supply. Disconnect the lamp base from the power
pack.
-
These units are designed for use in dry conditions. Protect them from water and
from excessive exposure to dust.
-
The units are not suitable for use in an environment where there is a risk of
explosion.
-
The accessories mounted onto the lamp bases may heat up to high temperatures
under specific conditions. Handle with care!
-
With due allowance for heat radiation, lamp bases with more than 100 W modelling
light may be directed against inflammable surfaces only at a minimum distance of
1 m.
-
For safety reasons, never operate the lamps without the protecting glass
in place.
-
Flash light contains, similar to sunlight, a specific portion of UV light. The
undesirable side effects on skin and eyes are considerably reduced by using flash
tubes and glass covers with a UV coating. Without these or other protective filters,
use with extreme care when shooting.
-
Even when disconnected from the power supply, dangerous voltages may remain
inside the unit. For this reason units should be opened by trained personnel only.
-
Do not block the cooling louvers on the unit.
-
broncolor
power packs and lamp bases meet an extremely high safety standard.
When connecting
broncolor
products to other manufacturers' products, integrated
safety measures may become ineffective. Due to different design features and
contact assignment of the lamp plugs of other makes, the user himself/herself may
even be at risk. We offer no guarantee and accept no liability for damages which
may be caused by this type of usage.
