Brompton TESSERA M2, Руководство пользователя, Страница: 147 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 10.5 - INPUT OVERRIDE
147
10.5.2 - SDI (SX40, S8, M2)
Fig 10.8 - Input override controls for SDI inputs on the Tessera SX40 (left) and M2 (right)
Both the Tessera SX40 and Tessera M2 LED Processor s can receive SDI inputs. Only the Tessera
SX40 and S8 are HDR capable m eaning their input override controls are m ore extensive than for
the Tessera M2 which allows only for the colour space to be set.
N OTE SDI connections do not provide any m etadata for setting the input form at properties.
This m eans the values will need to be set m anually.
For the Tessera SX40 and Tessera M2 they are set to the values shown above.
M et adat a Propert y Propert y Explanat ion
HDR Format
Set s t he f ormat of t he incoming video cont ent :
l
SDR: St andard Dynamic Range (not HDR) def ault
l
PQ: PQ-HDR10 as specif ied by ST 2084
l
HLG: Hybrid Log Gamma
PQ MaxCLL Override
Allows t he MaxCLL value t o be specif ied by t he user (when t icked) f or incoming
PQ cont ent . This overrides any value received by Inf oFrames
PQ Gain
A mult iplier adjust ment t o all bright ness levels of t he incoming PQ cont ent ,
should be on 1.00 by def ault which applies no changes
PQ Aut o Bright en
Aut omat ically adjust s t he bright ness of incoming PQ cont ent t o mat ch t he
bright ness capabilit ies of t he LED panels being used. This f unct ion uses t he
MaxCLL value and compares it t o t he bright ness rat ing of t he panels being
used, t hen scales all bright ness so t hat t he MaxCLL equals t he panel bright ness
Colour Space
Set t he colour space f or t he incoming cont ent . Cust om colourspaces can be set
by accessing t he DynaCal int erf ace