background image

5

bromic.com

• 

This heater is not equipped with a device to control the room 
temperature. Do not use this heater in small rooms when they are 
occupied by persons not capable of leaving the room on their own, 
unless constant supervision is provided.

• 

Fire Sprinklers must be located at an appropriate distance from each 
heater to avoid accidental activation of the sprinkler. Ethylene glycol 
or propylene glycol must never be used in fire sprinkler systems 
where heaters are present as these substances maybe become 
flammable when heated. A fire sprinkler professional must be 
consulted when heaters are installed where fire sprinklers are present 
to ensure that heaters and the fire sprinkler system are properly 
integrated.

• 

It is recommended to call the service company at least once a year 
to check the general status, the heating functions and the integrity of 
linked safety devices (RCD and CB).

• 

If the supply cord is damaged, it must be replaced by the 
manufacturer, its service agent or similarly qualified persons to avoid 
a hazard.

• 

Keep the cable away from sharp edges during handling and 
installation.

• 

Do not bend the electrical connection to the power supply.

• 

Do not pull on the cable or subject it to traction force.

• 

Avoid physical shock & impact to the heater when handling and after 
installation.

• 

Do not apply any pressure on the glass surface. Never hit the glass.

• 

Never use steam cleaners for cleaning of the appliance. 

• 

Keep the electrical connection area to the power supply clean.

• 

Ensure that the heating unit is not directly exposed to rain or water 
contact.

• 

Do not install or use the heater in any way other that indicated in the 
instruction leaflet.

• 

Use this heater only as described in this manual. Any other use not 
recommended by the manufacturer may cause fire, electric shock, or 
injury to persons.

• 

If any part of the instruction manual is missing or damaged, contact 
Bromic for a complete version.

• 

If you are unsure of any aspect of the installation, contact Bromic for 
advice.

The Platinum Smart-Heat™ Electric is designed to provide efficient spot heating for commercial and residential, land and 

coastal applications. 

The heaters are built with corrosion resistant materials, have electrical approval in North America, Europe and Australia, 
and are rated to IP55 water Ingress Protection for the Marine variants and IP54 water Ingress Protection for the Non-

Marine variants. Making the Platinum Smart-Heat™ Electric the perfect solution for a variety of indoor and outdoor heating 
applications.

PRODUCT OVERVIEW

IMPORTANT NOTES AND WARNINGS 

CONTINUED

 ...

PRODUCT FEATURES

 

Ultra-thin and stylish design

 

Efficient directional spot heating

 

Heat Zones — one or more heaters can be switched 
on and off simultaneously from a single remote-
located switch - (controller to be purchased 
separately).

 

Platinum Smart-Heat™ Electric Heaters can also be 
integrated into smart control systems - with the 
additional purchase of the Smart-Heat™ Link.

 

Wind resistant & IP55 water protection rating for 
Marine Variants.

 

Wind resistant & IP54 water protection rating for 
Standard Variants.

 

Ceiling and Wall Mounting Bracket - included with 
heater

 

Optional Mounting Brackets - purchased separately 
from heater:

 

Ceiling Recess Kit

 

600mm Tube Suspension Kit

 

1200mm Tube Suspension Kit

SPECIFICATIONS                             

Model:

Platinum Smart-Heat™ Electric II

Variant:

Standard - IP54

Marine - IP55

Region:

AU/NZ

EU/UK

US/CA

AU/NZ

EU/UK

US/CA

Part no.

Black

2622000

BH3622000

BH3622000

BH3622004

2622002

BH3622002

BH3622002

BH3622006

White

2622001

BH3622001

BH3622001

BH3622005

2622003

BH3622003

BH3622003

BH3622007

Heat Output:

4500 W

Power connection  
required:

220-240 V - A.C.

 

50/60 Hz - 18.8 A

208 V - A.C. 

60 Hz 21.6 A

220-240 V - A.C.

 

50/60 Hz - 18.8 A

208 V - A.C. 

60 Hz 21.6 A

Dimensions: 

(W x H x D)

1351 x 257 x 54 mm

(53.2” x 10.1” x 2.1”)

Weight:

15kg (33lbs)

Finish:

Brushed Stainless Steel 304

Brushed Stainless Steel 316

Approval:

AU/NZ:   RCM - Intertek

EU/UK:   CE/LVD - Intertek - 200802166 SHA-V1     CB - Intertek - SE-102296

USA/CAN:   cETLus - Intertek - 5001799

Содержание 2622000
















Отзывы: