- 10 -
Natural Gas Conversion
When converting an LP side burner that is connected to an LP grill, you MUST convert both appliances. It is dangerous to have
an LP appliance and an NG appliance supplied by the same fuel.
BroilChef Premium side burners and built-in grills are manufactured to use standard liquid propane (LP) and can be converted to
burn natural gas (NG). You will need tools, 2 NG orifices for side burners and 5 NG orifices for built-in grills (depending on the
size of the grill). Only the NG orifices are supplied to do the conversion, tools are not provided.
Tools Required to Convert Side Burner and Grill from LP to NG:
1.
7mm and 6mm Socket Wrench
2.
10mm Open Wrench
3.
#2 Phillips Screwdriver
4.
Needle Nose Pliers
WARNING
.
You must have an authorized service technician perform this procedure. If these instructions are not followed exactly, a fire
or explosion may result causing property damage, personal injury or loss of life. BroilChef Premium will not be held
responsible for an improperly converted gas side burner.
Before you begin, make certain the LP gas source has been disconnected.
Replacing Side Burner’s Orifices (BCP5001L & BCP5001S):
1.
Remove the grate, burner cap and burner diffuser from the side burner.
2.
Using a 7mm socket wrench undo the propane orifices from the burner.
(See illustration below).
3.
After all the propane orifices are removed from the main burner
valve, place them in a safe spot away from your work area. This will
ensure that you do not re-install the Propane orifices.
4.
Replace the Orifices with the New Natural Gas Orifices supplied.
Tighten the orifice with the 7mm socket wrench.
5.
Put back the burner diffuser, burner cap and grate.
