GSF3016E
Instruction Manual
Guide d’utilisation
9
Step 5 (Heat insulation panel Assembly)
a)
Align each hole on the heat insulation panel (M) with the hole on
upper cart front beam (O) and upper cart back beam (N), then
insert one bolt (AA) with one lock washer (CC) and one flat
washer (DD) into each hole, then tighten by hand until secure.
b)
Go back and tighten all bolts using the screwdriver provided.
Step 6 (Doors and Storage Basket Assembly)
a) Insert the bottom pin of right door (Z) into the pre-drilled hole on the cart
bottom panel (R).
b) Push down the top pin of right door and insert it into the pre-drilled hole
on the upper cart front beam (O).
c) Repeat the procedure for the left door (Y) assembly.
d) Loosen the two pre-installed bolts on left door and
l
eave 1/4 of the bolt's
length extending from the door. Align the holes on the storage basket (X)
with the extended two bolts on the door. Push down on the storage
basket until it locks into place.
e) Go back and tighten all bolts using the screwdriver provided.
Step 7 ( Install body assembly)
a) Place the body assembly (A) on the cart
assembly.
b) Align the holes on cart front legs with the
holes on the body assembly (A), then insert
one bolt (AA) with one spring washer (CC)
and one flat washer (DD) into each hole.
T
ighten by hand until secure.
c) Align the hole on each back leg with the
holes on body assembly. Insert one bolt (AA)
with one spring washer (CC) and one flat
washer (DD) into each hole. T
ighten by
hand until secure.
d) Go back and tighten all bolts using the
screwdriver provided.
Attention:
Unpack the hose assembly (located
underneath the firebox) prior to
assembling the grill body to the cart,
and pull out the regulator/hose to the
cart side panel before doing the next
step.
