GSF3016E
Instruction Manual
Guide d’utilisation
7
Hardware listed above is not scaled to exact size.
(A screwdriver is required on assembly and is included for your convenience).
Assembly Instructions
Remove all contents from the packaging. Make sure all parts
are present before attempting assembly. Once the grill is fully assembled,
go back and check to make certain all the bolts
are secure. Tighten again using the screwdriver provided if necessary.
Estimated Assembly Time: 45 minutes.
Step 1 (Cart Assembly)
a) Align the holes on the left end of cart bottom
panel (R) with the holes on the left cart side panel
(U), then insert one bolt (II) with one lock washer
(CC) and one flat washer (DD) into each
pre-drilled hole. Tighten all bolts by hand until
secured. Repeat the procedure on the right end.
b) Align the holes on the right end of upper cart front
beam (O) with the holes on right cart side panel
(V), then insert one bolt (II) with one lock washer
(CC) and one flat washer (DD) into each
pre-drilled hole. Tighten all bolts by hand until
secured. Repeat the procedure on the left end.
c) Repeat the procedure for the upper cart back
beam (N) assembly.
d) Go back and tighten all bolts using the
screwdriver provided.
Lock Washer
