BRODA Elite Chairs
31
1.
Identify the caster that is not functioning properly.
2.
Adjust the pedal so that the caster, which is still fully functional, is locked in the directional lock mode
(the caster s locked from rotating and is trailing behind the chair and the wheel still spins).
3.
If applicable, remove end caps on the end of the hexagonal shaft (in the middle of the pedal) Use a
3mm Allen-wrench to loosen the setscrew in the pedal beside the caster you are replacing. Remove the
pedal from the hexagonal shaft. Check to make sure there are no burrs on the shaft where the pedal was
secured. If there are burrs present use a file to remove them before proceeding to the next step.
4.
Use a 13mm wrench to remove the mounting bolts that secure the faulty caster.
5.
Slide the hexagonal shaft out of the frame of the chair approximately 6”, on the side with the pedal still
attached (next to the good caster).