Closed with Code Change in Fabric OS v7.0.0b
Fabric OS v7.0.2 Release Notes v1.0
Page 89 of 99
Defect ID:
DEFECT000357943
Technical Severity:
High
Summary:
Trackchanges is not generating TRK-1003 for SSH logout.
Symptom:
With a Trackchanges setting of 1,1, the track changes feature is not generating the TRCK-
1003 message when a SSH session is logged out.
Feature:
FOS Security
Function:
Authentication
Probability:
High
Found in Release:
FOS6.4.1
Service Request ID:
631887
Defect ID:
DEFECT000359245
Technical Severity:
High
Summary:
The NS contains stale entries after a bad disk is remove from a loop attached device.
Symptom:
When a disk is removed from a loop attached device, the pid still shows up in the name
server.
Workaround:
port bounce where the device connected.
Feature:
FC Services
Function:
Name Server
Probability:
Medium
Found in Release:
FOS6.3.2
Service Request ID:
641021
Defect ID:
DEFECT000359493
Technical Severity:
High
Summary:
If FX8-24 blades are swapped, the Inband Mgmt configuration is not properly loaded onto
the new blade.
Symptom:
Inband Mgmt is not functioning after FX8-24 blade is replaced (swapped).
Workaround:
Reboot CP
Feature:
FCIP
Function:
Other
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000360527
Technical Severity:
High
Summary:
An FCIP Tunnel in an FCR Backbone may lose buffer credits and go down if FastWrite is
enabled.
Symptom:
FCIP Tunnel in an FCR backbone fabric goes down due to credit loss.
Workaround:
Disable FCIP FW.
Feature:
FCIP
Function:
Other
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000349412
Technical Severity:
Medium
Summary:
portcfgshow output displays "Fill Word (Current)" incorrectly
Symptom:
portcfgshow displays incorrect values for "Fill Word (Current)" field
Feature:
8G ASIC Driver
Function:
Other
Probability:
Medium
Found in Release:
FOS7.0.0
