background image

Glossary-4

Fabric Watch User’s Guide

Domain ID

As applies to SilkWorm switches, a unique number between 1 and 239 that 
identifies the switch to the fabric and is used in routing frames. Usually 
automatically assigned by the switch, but can be manually assigned.

E_D_TOV

Error Detect Time-out Value; the minimum amount of time a target waits for a 
sequence to complete before initiating recovery. Can also be defined as the 
maximum time allowed for a round-trip transmission before an error condition is 
declared. See also R_A_TOVRR_TOV.

E_Port

Expansion Port; a type of switch port that can be connected to an E_Port on 
another switch to create an ISL. See also ISL.

EE_Credit

End-to-end Credit; the number of receive buffers allocated by a recipient port to 
an originating port. Used by Class 1 and 2 services to manage the exchange of 
frames across the fabric between source and destination. See also End-to-end 
Flow Control
BB_Credit.

EIA Rack

A storage rack that meets the standards set by the Electronics Industry 
Association.

Enabled Zone 
Configuration

The currently enabled configuration of zones. Only one configuration can be 
enabled at a time. See also Defined ConfigurationZone Configuration.

End-to-end 
Flow Control

Governs flow of class 1 and 2 frames between N_Ports. See also EE_Credit.

Error

As applies to fibre channel, a missing or corrupted frame, time-out, loss of 
synchronization, or loss of signal (link errors). See also Loop Failure.

Exchange

The highest level fibre channel mechanism used for communication between 
N_Ports. Composed of one or more related sequences, and can work in either one 
or both directions.

F_Port

Fabric Port; a port that is able to transmit under fabric protocol and interface over 
links. Can be used to connect an N_Port to a switch. See also FL_PortFx_Port.

Fabric

A fibre channel network containing two or more switches in addition to hosts and 
devices. May also be referred to as a switched fabric. See also TopologySAN
Cascade.

Fabric Name

The unique identifier assigned to a fabric and communicated during login and 
port discovery.

Fabric OS

TM

The proprietary operating system on Brocade switches.

FC-AL-3

The Fibre Channel Arbitrated Loop standard defined by ANSI. Defined on top of 
the FC-PH standards.

FC-FLA

The Fibre Channel Fabric Loop Attach standard defined by ANSI.

FCP

Fibre Channel Protocol; mapping of protocols onto the fibre channel standard 
protocols. For example, SCSI FCP maps SCSI-3 onto fibre channel.

FC-PH-1, 2, 3

The Fibre Channel Physical and Signalling Interface standards defined by ANSI.

FC-PI

The Fibre Channel Physical Interface standard defined by ANSI.

FC-PLDA

The Fibre Channel Private Loop Direct Attach standard defined by ANSI. Applies 
to the operation of peripheral devices on a private loop.

Содержание Brocade Fabric Watch










































Отзывы: