Brobo OHS Series, Руководство по эксплуатации и обслуживанию

Страница: 28 / 58

Brobo Group
brobo.com.au
7.2.1. APPENDIX - RISK/HAZARD ASSESSMENT
Hazard Type Hazard Identification
Hazard
Assessment
Hazard Management Strategies
(Recommended for the Purchasing / Buyer / User)
Mechanical
Cutting/Severing Low/Med

Keep machine correctly guarded & operational at all
times.

Keep & clear of rotating blade when cutting.
Entanglement Low

Do not wear loose jewelry, clothing or items that
might get caught in the saw.

Always keep the work area free of unnecessary
objects or tools.
Puncturing Low

Wear protective gloves when handling and /or
changing the blades.

The power source is to be isolated prior to opening
electrical enclosures.
Electrical Electrocution Low

Remove the power supply when any maintenance
and/or repairs are to be undertaken.

The power source is to be isolated prior to opening
electrical enclosures.
Thermal Burn Low

Under normal working conditions, the gearbox can
become hot thus, do not touch.

Be careful when handling workpiece after cutting, as
it might be very hot.
Noise - Low

Under no load testing, the noise level measured is
below 85 dB (A).

If the noise level becomes too high during a cutting
cycle, stop the process & inspect for the problem, if
any are present.
Substance - Low

Care must be taken as some coolants may be
harmful or cause allergic reactions. Please read the
labels carefully.

Keep the work area clean & regularly remove
excess coolant, oils, & other impurities.
Hazardous Events
Unexpected Start-Up Low

During a power failure, turn the machine off.

If the problem persists, please contact Brobo Group
engineering department.
Failure of Control System Low

If the ON/OFF switch fails, isolate the machine at
the power source.

Ensure that no fuses are blown & that all electrical
circuitry are operating within normal parameters.
Additional
Hazards
Operator Error Low

Ensure blades, clamps & materials are correctly
secured.
Impact Low

Wear safety glasses at all times during cutting cycle.
MACHINE TYPE:
SERIAL NO.:
RECEIVING COMPANY: (SAFETY OFFICER)
BROBO GROUP (AUST) PTY. LTD.
A.C.N. 098 264 316
A.B.N. 42 098 264 316
8 Fowler Rd, Dandenong, 3175
Victoria, AUSTRALIA.
Tel: 61 3 9792 9944 Email: info@brobo.com.au
Fax: 61 3 9791 9955 Website: www.brobo.com.au
Quality System

Quality
Endorsed
Company
ISO 9001 Lic.
10292
SAI GLOBAL