Broaster 1600 Скачать руководство пользователя страница 52

Страница: 52 / 56

5-2

GAS:

DO NOT

operate unit with-

out filter pan and filter pan

cover in its proper position. Filter pan cover
must be wiped clean after each filtering
cycle.

1. Clean unit as outlined in the operation

manual.

2. Make sure all controls are OFF.

3. Install cover O-ring as outlined under

COVER in CLEANING section of oper-
ation manual.

4. Fill cooking well with cooking oil. See

PRE-COOKING PREPARATIONS in
operation manual.

5. Turn circuit breaker ON or install fuse.

6. Turn cook/filter switch to COOK. The

HEAT ON light will illuminate indicating
the cooking oil is being heated.

NOTE:

Check to make sure burner is

actually lit. If not see LIGHTING
INSTRUCTIONS

7. Check flame on top of burner. It

should be all blue and settled on the
face of the burner. If it is not check to
make sure the air shutter is locked in
place.

NOTE:

If it is loose see the AIR SHUT-

TER ADJUSTMENT procedure.

8. If CHEC appears in display, turn unit

off and back to COOK.

9. Set timer and temperature controls.

10. Turn pressure regulating valve handle

to CLOSED. The timer will start count-
ing down. At the end of a cook cycle,
an audible alarm will sound until pres-
sure regulating valve handle is turned
to OPEN.

1800GH LIGHTING INSTRUCTIONS

Start-Up:

1. Turn cook/filter switch OFF.

2. See OIL LEVEL in the operation man-

ual.

3. Turn gas shut-off valve (1) ON. Wait

five minutes before turning gas control
ON.

4. Slide switch (2) on top of gas control

to ON.

Note:

The model 1800GH has an intermit-

tent pilot burner. This type of pilot lights
when the controller calls for heat and goes
out when the controller isn’t calling for heat.

5. To light pilot and main burners, turn

cook/filter switch to COOK.

broaster.com

Manual #14678 1/99 Rev 2/14

Содержание 1600

























































Результаты поиска

Содержание 1600

Отзывы:

Похожие инструкции для 1600

Бренды по названию

Популярные бренды

Broaster 1600, Руководство по установке

Результаты поиска

Содержание 1600

Отзывы:

Похожие инструкции для 1600

Бренды по названию

Популярные бренды