Broaster 1600 Скачать руководство пользователя страница 51

Страница: 51 / 56

5 - OPERATIONAL CHECK-OUT

5-1

See operation manual for more detailed
instructions.

COVER ASSEMBLY

DO NOT force cover open
or closed when pressure

regulating valve is closed. Damage to the
unit may occur.

1. OPEN pressure regulating valve. Be

sure pressure gauge indicates no
pressure in cooking well.

2. To OPEN cover, push down on cover

handle then rotate handle clockwise.
Slide assembly to the rear of the unit.

3. Remove basket lifter, envelope and all

other items packed in the food basket.

4. Remove food basket and packing in

bottom of cooking well.

5. To CLOSE cover, pull assembly toward

the front and rotate handle counter-
clockwise.

Cover should slide easily front to back
and cover should lower and raise eas-
ily within the cooking well.

6. CLOSE pressure regulating valve han-

dle.

Handle should slide easily from side to
side and locking pin should move in
and out over the cover.

INITIAL START UP

ELECTRIC:

DO NOT

operate unit with-

out filter pan and filter pan

cover in its proper position. Filter pan cover
must be wiped clean after each filtering
cycle.

1. Clean unit as outlined in the operation

manual.

2. Make sure all controls are OFF.

3. Install cover O-ring as outlined under

COVER in CLEANING section of oper-
ation manual.

4. Fill cooking well with cooking oil. See

PRE-COOKING PREPARATIONS in
operation manual.

5. Turn circuit breaker ON or install fuse.

6. Turn cook/filter switch to COOK. The

HEAT ON light will illuminate indicating
the cooking oil is being heated.

7. Set time and temperature controls.

8. Turn pressure regulating valve handle

to CLOSED. The timer will start count-
ing down. At the end of a cook cycle,
an audible alarm will sound until pres-
sure regulating valve handle is turned
to OPEN.

9. If CHEC appears in display, turn unit

off and back to COOK.

broaster.com

Manual #14678 1/99 Rev 2/14

Содержание 1600

























































Результаты поиска

Содержание 1600

Отзывы:

Похожие инструкции для 1600

Бренды по названию

Популярные бренды

Broaster 1600, Руководство по установке

Результаты поиска

Содержание 1600

Отзывы:

Похожие инструкции для 1600

Бренды по названию

Популярные бренды