18
Location:
Located in the bathroom or in other locations where there is temporary
excess humidity or pollutants.
Purpose:
To eliminate excess humidity produced by showers or other periodic
activities producing pollutants.
20-MINUTE PUSH-BUTTON TIMER:
(A
VAILABLE ONLY FOR
HRV100H
AND
HRV200H M
ODELS
)
Activate the push-button.
Results expected:
1.
Motor speed: High for 20 minutes.
2.
Indicator light goes “ON”.
3.
Air exchange indicator light goes “ON” (VT2W wall control
only).
20/40/60-MINUTE PUSH-BUTTON TIMER:
(N
OT AVAILABLE FOR
HRV100H
AND
HRV200H M
ODELS
)
Activate the push-button. Within 2 seconds, push once for 20 minutes,
twice for 40 minutes or three times for a 60-minute activation.
Results expected:
1.
Motor speed: High for 20, 40 or 60 minutes.
2.
Indicator light goes “ON” and flashes every 5 seconds (one
time to indicate a 20-minute operation, two times for a
40-minute, and three times for a 60-minute operation).
3.
Air exchange indicator light goes “ON”
(VT2W wall control only).
NOTE: To stop activation, push one more time.
60-MINUTE CRANK TIMER:
Activate the timer.
Results expected:
1.
Motor speed: High for either 20, 40 or 60 minutes.
2.
Air exchange indicator light goes “ON”
(VT2W wall control only).
High speed activation time
Position of dial
20 minutes
1 to 19
40 minutes
20 to 39
60 minutes
40 to 60
2.8 U
SING THE
O
PTIONAL
C
ONTROLS
OFF
10
Turn
Past
VC0017
20
30
40
50
60
MINUTES
HOLD
ON
VC00
3
0
VC0046
20 min.
40 min.
60 min.
