Broadview OfficeSuite Simplicity, Руководство пользователя

Страница: 8 / 36

8
Step 3 - Connecting the phone to the base station
a. If a phone is not connected with a base, it will display Unregistered on the home screen
when the phone is idle.
b. Press the OK button on the phone to get to the Select Base screen.
c. Use the up/down navigation keys on the phone to select BS1 (or BS2 if you are connecting
this phone to a second base station) and press the Select soft key.
d. The phone will display Registering while it attempts to connect to the base.
e. When successful, the phone will beep and display Registered.
f. On the home screen, the phone will display the phone¹s number, e.g. HS2. It may display
No Service briefly until the phone has received settings from the base. When No Service
disappears it is ready for use.
g. Refer to the Quick Start Guide for information about how to use your new OfficeSuite®
phone.
If connecting fails, ensure that the base station is still in Registration Mode (with the LED
blinking amber and blue) and that the phone and base station are in close proximity. Repeat
step 3.