Broadcom Symantec S550, Руководство по установке, Страница: 9 / 49

Symantec
™
Endpoint Detection and Response 4.5 Installation Guide for the S550
appliance
Configuration Description Value to input
Re-enter new password:
Confirm the new password. Provide this information to the administrator installing the
appliance in a secure method.
Ensure that the password is retained in a secure location
for archival purposes.
Select one of the
following appliance roles:
1 = Management
platform ..., 2 = Network
scanner ..., 3 = All-in-
one ... []?
Specify the appliance's role.
About operating roles, operating modes, and
network connections
_______ 1 - Management platform
_______ 2- Network scanner
_______ 3- All-in-one
Configure the
management port. IPv4
address []:
The static IP for the management port. For a
management platform or all-in-one appliance,
this IP address is used to access the EDR
appliance console from a browser.
________.________.________.________
IPv4 netmask []:
The network mask for the management port
IPv4 address.
________.________.________.________
Gateway []: The IP address for the gateway (switch
or router) that the appliance can use to
communicate with the rest of your network.
________.________.________.________
Name server (IPv4) []: The IP address of a name server that the
appliance can use to resolve IP addresses.
________.________.________.________
Configure another
nameserver? [y/n]
Yes add an additional name server or No to
use only one name server. If yes, provide the
IP address of a second name server.
________ yes
________.________.________.________
________ no
Network scanner role only:
IP address of the
Management Platform:
The management port IP address of the
management platform appliance that controls
this scanner.
________.________.________.________
Management platform or
network scanner roles only:
Communication Channel
password:
A secure password to encrypt
communications between the management
platform and all its network scanners.
This password must be the same for the
management platform and all network
scanners. It should be different from the
management console password. Letters,
numbers, periods, underscores, and hyphens
are allowed, and the password can be up to
50 characters.
Provide this information to the administrator installing the
appliance in a secure method.
Ensure that the password is retained in a secure location
for archival purposes.
Management platform or
network scanner roles only:
Re-enter Communication
Channel password:
Confirm password. Provide this information to the administrator installing the
appliance in a secure method.
Ensure that the password is retained in a secure location
for archival purposes.
Configure IPv4 static
routes? [y/n]
Yes to configure an IPv4 static route or no to
skip this configuration step.
Static routes may be required. For example,
use static routes to connect a network
scanner to its management platform.
________ yes
________ no
Destination (CIDR
allowed):
Gateway:
If you choose to configure IPv4 static routes,
provide a destination IP address and the
gateway IP address.
________.________.________.________
9