Broadcom Symantec S550 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 49

Broadcom Symantec S550 Скачать руководство пользователя страница 5

Symantec

™

Endpoint Detection and Response 4.5 Installation Guide for the S550

appliance

System Requirements

Symantec EDR version support for appliances

The Symantec S550 appliance supports Symantec EDR 4.1 and later.

Browser requirements for the EDR appliance console

Browser requirements for the EDR appliance console

lists the web browsers that are compatible with the EDR appliance

console. JavaScript must be enabled in the browser and cookies must be allowed. The minimum resolution for viewing the

EDR appliance console is 1280x1024.

Table 1: Browser requirements for the EDR appliance console

Browser

Version

Microsoft Internet Explorer

11 or later

Note:

Quick filters are not supported.

Mozilla Firefox

81.0 or later (64-bit)

Google Chrome

85.0.4183.121 or later (64-bit)

Microsoft Edge

Version 85.0.564.63 or later (64-bit)

Safari

Not supported

Opera

Not supported

System requirements for Symantec Endpoint Protection integration

Symantec Endpoint Protection version requirements

Symantec Endpoint Detection and Response can integrate with Symantec

™

Endpoint Protection for enhancing event

information and providing Endpoint Communications Channel (ECC) functionality. Symantec EDR has certain version

requirements based on various components of SEP.
The minimum SEPM version is 12.1 RU6 or later. Symantec EDR can connect to multiple SEP sites with one connection

per SEP site, up to a total of ten connections to SEPM hosts.
Symantec EDR can manage the client endpoints that run SEP version 12.1 RU 6 MP3 or later with full ECC functionality.

However, clients must be running SEP 14 or later to take advantage of ECC 2.0 functionality.
Client endpoints that run versions earlier than SEP 12.1 RU5 are not supported. Some functionality is limited for the

clients that run on versions between SEP 12.1 RU5 and 12.1 RU6 MP3. The Symantec EDR documentation describes

any functionality limits based on the version of the SEP client.

Synapse log collector database requirements

SEPM 14.3 RU1 or later uses Microsoft SQL Express as its database for log collection. Symantec EDR can access the

database without any special host system requirements.
SEPM 14.3 MP1 or earlier supports either the MS SQL Server database or an embedded database. When SEPM uses

an embedded database, Symantec EDR uses a log collector on the SEPM host. This log collector requires the SEPM host

to be running one of the following operating systems:

5

«
...
3
4
5
6
7
...
»

Содержание Symantec S550


















































Отзывы:

Нет отзывов