Broadcom G610 Скачать руководство пользователя страница 19

Страница: 19 / 74

53-1004408-11 Installation Guide

Brocade

G610 Switch Hardware Installation Guide

Installing the 1U and 2U Mid-Mount Kit for Two-Post Racks

(XBR-000165 and XBR-R000292)

Use the following instructions to install a fixed-port device in a mid-mount configuration in a two-post rack using the 1U

and 2U Mid-Mount Kit for Two-Post Racks (XBR-000165 and XBR-R000292).

Observe the following when mounting this device:

•

Two people are required to install the device in a rack. One person holds the device, while the other secures the device

to the rack.

•

Before mounting your device, review any specific installation and facility requirements in this hardware installation

guide.

•

Hardware devices illustrated in these procedures are only for reference and may not depict the device you are

installing into the rack.

Time and Items Required

Allow 15 to 30 minutes to complete the installation procedure.
The following items are required to install a device using the 1U and 2U Mid-Mount Kit for Two-Post Racks

(XBR-000165 and XBR-R000292).

•

No. 2 Phillips torque screwdriver

•

1/4-in. slotted-blade torque screwdriver

NOTE

You may need two people to install the device, one to support the device, while the other secures it into the rack.

CAUTION

Use the screws specified in the procedure. Using longer screws can damage the device.

Parts List

The following parts are provided with the 1U or 2U Mid-Mount Rack Kit for Two-Post Racks (XBR-000165 and XBR-

R000292).

NOTE

Depending on the device type, not all parts may be used in an installation.

53-1004408-11

Broadcom

Содержание G610











































































Результаты поиска

Содержание G610

Отзывы:

Похожие инструкции для G610

Бренды по названию

Популярные бренды

Broadcom G610, Руководство по установке оборудования

Результаты поиска

Содержание G610

Отзывы:

Похожие инструкции для G610

Бренды по названию

Популярные бренды