Broadcom Emulex LPe12000 Series, Руководство по установке

Страница: 24 / 50

Broadcom LPeHBAs-IG126-100
24
Emulex Host Bus Adapters Installation Guide
Chapter 3: References
3.1 Specifications
3.1.1 LPe35000-Series HBAs
Table 16: LPe35000-Series HBA Specifications
Parameter Range
Physical dimensions LPe35000 HBAs and LPe35002 HBAs: low-profile form factor, 6.600 in. by 2.708 in.
LPe35004 HBAs: standard height, half-length form factor, 6.600 in. by 4.376 in.
Power requirements Multimode optics (PCIe 3.0):

Single-channel LPe35000 HBAs: 8.8W (typical), 9.9W (maximum)

Duad-channel LPe35002 HBAs: 9.9W (typical), 11.0W (maximum)

Quad channel LPe35004 HBAs: 14.4W (typical), 15.9W (maximum)
Single-mode optics (PCIe 3.0):

Single-channel LPe35000 HBAs: 8.9W (typical), 10.1W (maximum)

Duad-channel LPe35002 HBAs: 10.2W (typical), 11.3 (maximum)

Quad channel LPe35004 HBAs: 15.0W (typical), 16.4W (maximum)
Multimode optics (PCIe 4.0):

Single-channel LPe35000 HBAs: 9.6 (typical), 10.7 (maximum)

Dual-channel LPe35002 HBAs: 10.7 (typical), 11.8 (maximum)
Single-mode optics (PCIe 4.0):

Single-channel LPe35000 HBAs: 9.7 (typical), 10.9 (maximum)

Dual-channel LPe35002 HBAs: 11.0 (typical), 12.1 (maximum)
Power susceptibility The HBAs can operate within the following voltage ranges:
PCIe 12V: 12V ± 8%
Power supply noise susceptibility: 100 mV p-p at frequencies 100 kHz or less
Airflow LPe35000 HBAs and LPe35002 HBAs: 200 linear feet per minute (minimum)
LPe35004 HBAs: 275 linear feet per minute (minimum)
Temperature 0°C to 55°C (operating)
–20°C to 85°C (storage)
NOTE: Operating HBAs in higher temperature conditions might result in early failure.
Humidity 5% to 95% (noncondensing, 22°C wet bulb) for storage
10% to 90% (noncondensing, 22°C wet bulb) for operation