Broadcom Emulex LPe12000 Series, Руководство по установке, Страница: 26 / 50

Broadcom LPeHBAs-IG126-100
26
Emulex Host Bus Adapters Installation Guide
3.1.3 LPe16000-Series HBAs and LPe15004 HBAs
Agency approvals

Class 1 Laser Product per DHHS 21CFR (J) & EN60825-1 when equipped with approved optical devices

UL recognized to UL 62368-1:2014

cUR recognized to CAN/CSA 22.2, No. 62368-1-14

FCC Rules, Part 15, Class A

Industry Canada, ICES-003, Class A

EU (CE Mark)

EN55024:2010

EN55032:2012, Class A

Australian EMC Framework (RCM)

AS/NZSCISPR32:2015, Class A

Japan VCCI, Class A

Taiwan BSMI (CNS 13438), ROHS (CNS 15663), Class A

Korea MSIP, Class A

RoHS Compliant (Directive 2011/65/EU)

China RoHS compliant
Vibration, peak
acceleration 0.25g (5 Hz to 500 Hz)
(Sweep rate = 1 octave/minute)
Table 18: LPe16000-Series HBAs and LPe15004 HBA Specifications
Parameter Range
Physical dimensions LPe15004, LPe16000B, and LPe16002B HBAs: Low-profile form factor, 6.600 in. by 2.731 in.
LPe16004 HBAs: Standard height, half length form factor, 6.600 in. by 4.376 in.
Power requirements Quad-channel LPe15004 HBAs: 11.5W (typical), 14.2W (maximum)
Single-channel LPe16000B HBAs: 9.3W (typical), 11.6W (maximum)
Dual-channel LPe16002B HBAs: 11.1W (typical), 13.3W (maximum)
Quad-channel LPe16004 HBAs: 22.4W (typical), 25.0W (maximum)
Power susceptibility The HBAs can operate within the following voltage ranges:
PCIe 3.3V: 3.3V ± 9%
PCIe 12V: 12V ± 8%
Power supply noise susceptibility: 100 mV p-p at frequencies 100 kHz or less
Airflow LPe15004, LPe16000B, and LPe16002B HBAs: 200 linear feet per minute (minimum)
LPe16004 HBAs: 250 linear feet per minute (minimum)
Temperature LPe15004 HBAs: 0°C to 55°C (operating)
LPe16000B, LPe16002B, and LPe16004 HBAs: 0°C to 50°C (operating)
All HBAs: –40°C to 70°C (storage)
NOTE: Operating HBAs in higher temperature conditions might result in early failure.
Humidity LPe15004 HBAs:

5% to 95% (noncondensing, 23°C wet bulb) for storage

10% to 90% (noncondensing, 23°C wet bulb) for operation
LPe16000B, LPe16002B, and LPe16004 HBAs:

5% to 95% (noncondensing, 22°C wet bulb) for storage

10% to 90% (noncondensing, 22°C wet bulb) for operation
Table 17: LPe32000-Series HBA and LPe31000-Series HBA Specifications (Continued)
Parameter Range