Broadcom BCM20737TAG, Быстрый старт, Страница: 24 / 28

Testing a WICED Smart Tag with Windows 8 WICED Smart Quick Start Guide
Broadcom ® WICED Smart Development System
September 24, 2014 • MMPWICED-Smart-QSG203-R Page 24
Testing the Hello Application
To test the application with a WICED Smart tag, follow the instructions provided for each of the Hello Service
characteristics (see Figure 9 , below).
• Hello Input Characteristic
a. Select
Allow Notifications
in the combo box.
b. Push the middle (
Application
) button on the WICED Smart tag (see Figure 10 ). The
Hello X
message is
displayed in the Value field. Each time the button is pressed, the message number increments.
• Hello Configuration Characteristic
a. Change the value for the Hello Configuration to 5 and then click
Write
. The tag emits an audible beep
and the LED flashes five times to acknowledge the write.
b. Push the
Application
button (see Figure 10 ) on the WICED Smart tag. The LED on the tag blinks five
times.
Figure 9: HelloClient Application
Figure 10: Application Button
Application Button
Broadcom
Confidential