e-mail:
voice:
360.854.9559
fax:
866.783.1742
6
SS 16.16 Installation and Operation Manual
DESCRIPTION
PRODUCT DESCRIPTION
Front Panel:
The SS 16.16 is a 2 - RU device (19”w x 3.50”h x 10”d). The front panel supports
two encoder controls, five function switches, 5 LED indicators, 1/4” headphone
jack, monitor speaker, mute switch and level control.
Rear Panel:
Installation is simplified with pluggable screw terminal connectors. The SS 16.16
may be pre-wired and installed in minutes. The multi-drop RS-232 modular con-
nector is provided for serial operation. The 5-pin “DIN” power connector is pro-
vided along with a universal switching tri-voltage power supply. Two power LED’s
in/-15 & 5 Vdc power supply operation.
Switches:
Five pushbutton switches (The “PGM” switch is hidden) that may be used to mute
or take selected audio configurations. Sixteen macros may also be programmed and
selected.
LED Indicators:
The SS 16.16’s 5 front panel LED indicators provide operational display of the fol-
lowing information:
• PGM LED, illuminates when the unit is in (menu) program mode.
• Power and serial data activity. This LED flashes when serial data is active.
• Macro indicator will light when in macro record or recall mode.
• “PIP” Parallel Input Port LED will flash indicating any change with the 16 input
“Pulse Stretcher” GPI ports.
• One audio activity LED. Monitors output channel sixteen and lights when lev-
els are above –30dbu.
Controls:
Audio Inputs:
Each of the 16 stereo inputs are balanced bridging (20K
Ω
) at a
nominal line level of +4dBu. Multi-turn level controls are provided for each stereo
channel. Odd numbered input level controls are left of the designated connector,
while even numbered controls are right of the connector. The double-decker input
connectors are configured with the odd numbered inputs on the bottom and the even
numbered inputs on the top. If required, 600
Ω
terminating resistors may be added
to the connector.
Audio Outputs:
The SS 16.16 provides sixteen balanced stereo outputs. Nominal
line level at 100 ohms is set for +4dbm. Sixteen left and right output level controls
are inside the unit and are labeled “OUT#LT or OUT#RT”. Controls are single turn
and provide approximately 2db of trim. The double-decker output connectors are
configured with the odd numbered outputs on the bottom connectors, while the even
numbered outputs are on top. If required, 600
Ω
terminating resistors may be added
to the connector.
WEBSITE:
Visit our web site for
product updates and
additional information
