20
©2020 Broadcast Electronics
Analog L/R
1.
Connect XLR cables from the desired Analog Left and Right audio sources. Activate the
source with constant level tones or typical level real audio on each channel.
2.
From the main screen on the transmitter control center on the front panel of the main
assembly, press up or down to navigate to the AUDIO INPUT menu. Press enter to
continue.
< AUDIO INPUT >
TRANSM ITTER CONTROL CENTER
COM POSITE
3.
Press up or down to select ANLG L/R as the primary audio source. Press enter to
continue.
AUD IN-> ANLG L/R
TRANSM ITTER CONTROL CENTER
^
4.
Set the stereo injection reduction (to allocate injection budget for secondary services).
Leave this at 100% if there are no secondary services.
5.
Press left or right to move the cursor. Press up or down on each digit to increment or
decrement the number.
100.0% ANLG L/R
TRANSM ITTER CONTROL CENTER
^
6.
Press enter when finished editing for the setting to take effect in the system and save.
7.
From the main screen on the transmitter control center on the front panel of the main
assembly, press up or down to navigate to the AUDIO LEVEL menu. Press enter to
continue.
< AUDIO LEVEL >
TRANSM ITTER CONTROL CENTER
8.
Press up or down to select L. Press enter to continue.
AUDIO LEVEL
TRANSM ITTER CONTROL CENTER
L-> -03.00dB
