16
©2020 Broadcast Electronics
SET CLOCK
TRANSM ITTER CONTROL CENTER
DATE
6.
Set the current date. Press left or right to move the cursor and press up or down to
increment or decrement the number.
DATE-> 2000-01-01
TRANSM ITTER CONTROL CENTER
^
7.
Press enter when finished editing for the setting to take effect in the system, save, and keep
time.
Frequency
STX 3 is built around frequency agile exciter and PA hardware. The frequency can be changed
directly from the front panel – no hardware modifications or tuning procedure is required when
the carrier frequency is changed.
If the STX RF output is on (“TX ON”) when the frequency is changed, the system will momentarily
turn the RF output off, change the frequency, and immediately turn RF back on again with the
new frequency
1.
From the main screen on the transmitter control center on the front panel of the main
assembly, press up or down to navigate to the FREQUENCY menu. Press enter to continue.
< FREQUENCY >
TRANSM ITTER CONTROL CENTER
98.10M Hz
2.
Press left or right to move the cursor between frequency digits. Press up or down on each
digit to increment or decrement the number.
FREQ-> 98.10M Hz
TRANSM ITTER CONTROL CENTER
^
3.
Press enter when finished editing for the frequency change to take effect.
