15
©2020 Broadcast Electronics
Turn on AC
1.
Unlock AC main breaker on the service line and turn the STX switch to the on position.
Set Time and Date
The internal real time clock holds the current time and date for use in the event log. This is a
rudimentary device that supports 24-hour format and does not adjust for daylight saving. If
installing during summer in a daylight saving region, following standard non-daylight time is
recommended instead (the internal real time clock does not automatically compensate for any
daylight saving).
1.
From the main screen on the transmitter control center on the front panel of the main
assembly, press up or down to navigate to the Date and Time menu. Press enter to continue.
< 2000-01-01 >
TRANSM ITTER CONTROL CENTER
00:00:00
2.
Press up or down to select the time editing screen.
SET CLOCK
TRANSM ITTER CONTROL CENTER
TIM E
3.
Set the local (24 hour non-daylight saving) time. Press left or right to move the cursor and
press up or down to increment or decrement the number.
TIM E-> 00:00:00
TRANSM ITTER CONTROL CENTER
^
4.
Press enter when finished editing for the setting to take effect in the system, save, and start
keeping time.
5.
Enter the date and time menu again. Press up or down to navigate to the date editing
screen.
