101652 Rev. A
4
75 Series Installation
2
Diverter Cartridge Installation
Slip-On Installation
Slide bonnet nut (1) over diverter sleeve (2) and
thread into rough-in body.
Hand tighten securely.
B.
FOR DIVERTER CARTRIDGE INSTALLATION:
Apply silicone lube to the o-ring (2) to make
the diverter sleeve (3) easier to install diverter
cartridge.
Rotate the diverter cartridge (1) so the pin is at
the bottom for proper installation.
Apply silicone lube to the o-rings (4) to make
the diverter sleeve (3) easier to install diverter
cartridge.
Align diverter sleeve so that the notches are in
the same position as the notches on rough-in
body (5).
A.
3
1
5
2
1
2
5
4
Trim Sleeve Installation
Slide trim sleeve (1) over cartridge, bonnet (2),
and O-ring. Ensure sleeve is properly positioned
over the cartridge with set screw access hole
downward. O-ring will help keep trim sleeve
securely in position.
1
2
A.
3
Trim Installation
