54
© 2020 Brivo Systems LLC. All rights reserved.
P-MAN-PUB-Panel Networking Guide
Panel Networking Guide
Event Rate Control
The Event Rate Control page allows the administrator to limit the number of notifications reported for Tamper
events, Wiring (Input/Output) events, and Unauthorized IP Access Events within a defined period of time.
1. Click
Hardware to access the Hardware menu bar.
2. Click
Event Rate Control to access the Event Rate Control page.
3.
To limit Tamper event notifications, check the
Tamper Event rate control checkbox.
4.
Enter the maximum number of event pairs (Open/Closed) and the number of hours (the default for each is
one).
5.
To limit Wiring (Input/Output) event notifications, check the
Wiring (Input IO) Event rate control checkbox.
6.
Enter the maximum number of event(s) and the number of hours (the default for each is one).
7.
To limit Unauthorized IP Access Event notifications, check the
Unauthorized IP Access Event rate control
checkbox.
8.
Enter the maximum number of event(s) and the number of hours (the default for each is one).
9. Click
Apply to complete the process.
Figure 56: Event Rate Control
