(a) Entering a Program.
(b) Selecting the Days to be Changed.
(c) Selecting the Period to be Changed.
Page 12 (d) Changing the Set Times.
(e) Changing the Set Temperature.
Page 13 (f) Changing the Zone Damper Program.
Page 14 Operating the Fan Only.
Page 14 Operating Add-On Airconditioning.
Winter Warmth.
The only thing better than coming home to a warm house on a cold day, is waking up to a
cosy bedroom and bathroom on a freezing winter's morning.
Now, your Brivis Networker puts this luxury at your fingertips.
If it's simplicity you want, the Networker allows you to operate your system manually, using
just a couple of basic controls.
On the other hand, you can have a heating system that really does the thinking for you.
The Networker has Timer/Thermostat programs that allow you to direct the system to
provide the temperature you want, when you want it, and where you want it.
Getting Started.
Once you have read "Introducing the Networker" operating the heater in Manual couldn't be
simpler.
Start with the Networker turned OFF [1]. (If you have the Networker ON while switching
between units you could start the wrong one inadvertantly).
If you have other appliances on the network, then just press the MODE control key [4] until
it selects "Heater" [4a].
Next, turn the Networker ON [1] and press the AUTO Control key [3] until the word
"Manual" [3a] appears near the bottom left-hand corner of the screen.
At the same time, the heater's "Set" temperature [15] will appear at the top of the screen.
(Note, the current "Room" temperature [12] is still visible in the top right of the screen).
