4
1.3 Codes / Regulations
Brivis ICE units must be installed, serviced or repaired in accordance with these instructions and related
regulations, codes, standards, and authorities. These include but may not be limited to:
•
Ozone Protection and Synthetic Greenhouse Gas Management Regulations 1995
•
AS/ NZS 1677.2 - Australian Standard, Refrigeration systems, safety requirements for fixed
applications
•
AS 4211.3 Gas recovery or combined recovery and recycling equipment
•
HB 276-2004 : A Guide to Good Practice for Energy Efficient Installation of Residential Heating,
Cooling & Air Conditioning Plant & Equipment
•
AS 4254 - Ductwork for air-handling systems in buildings
•
Local Electricity Authority
•
Local Building Regulations
•
Environment Authorities
•
Building Code of Australia (BCA)
•
Brivis “SuperSizeGuide” / Brivisize
It is recommended the Brivis “SuperSizeGuide” / Brivisize be followed in estimating cooling requirements
and for system design that will result in efficient installation and provide a higher level of comfort and
economical operation. Brivis assumes no responsibility for equipment installed in violation of any code or
regulations and these installation instructions.
2.0 Icebox Dimensions
Diagram 1:
Icebox Unit Dimensions
All dimensions in [mm]
Model
A
B
C
D
E
Duct
ØRA
Duct
ØSA
Flare
ØLL
Flare
ØSL
DINIB10Z7-L
772
844 392
670
460
350
350
9.5
15.9
DINIB10Z7-R
670
460
DINIB13Z7
956
881 566
846
417
19.05
DINIB15Z7
1026
955
496
400
400
Power
Lead 2.5m
Condensate
Drain 3/4” BSP
A
Ø
SA
Ø
RA
Liquid Line (LL)
Suction Line (SL)
Communication Loom Access
D
C
B
E
