7
REMOVING THE SEAT COVER
Release the all the buttons attaching the seat cover to the
stroller and remove the seat cover.
To put the seat cover back, attach it again using the but-
tons on the frame.
USING THE CARRYCOT
Insert the white plastic boards (A) into related positions as shown in the following pictures.
Insert the black plastic stripe (B) into the carrycot and fasten the buttons on both sides.
Connect the cover with the carry cot by zipping up the zipper.
Remove the front safety bumper and adjust the back rest to the lowest position before putting
the carrycot onto the stroller.
USE OF THE FOOTCOVER
(no picture)
When foot cover is needed just fasten the buttons on both sides.
USE OF THE RAINCOVER
(no picture)
The raincover is attached by placing the raincover over the carrycot and seat-unit.
Always use the raincover when it’s raining or snowing. If the stroller is damp before the rain-
cover is attached, wipe off the fabrics
fi
rst if possible.
USE OF THE BRITTON
®
BABYWAY CAR SEAT
WARNING! This stroller is only compatible with the Britton
®
BabyWay car seat.
WARNING!
Never lift the carseat when it is assembled onto the chassis.
WARNING!
Always engage the brake when you attach the carseat onto the chassis.
EN
