3
ASSEMBLY
OPENING THE STROLLER
WARNING!
Make sure that children are kept away from moving parts when assembling the
pram, otherwise they might be at risk of injury.
Press the handle toward the back until
the joints lock in the place on the left
and right side.
WARNING!
The chassis-locks must click into locked position.
WARNING!
Always check that the main locking devices are engaged correctly before using
your stroller, it is dangerous to use the stroller without these in their correct position.
ASSEMBLING THE WHEELS
Make sure the parking lock is not engaged.
Place the wheel on the axle as shown in the
photo. Slide the wheel all the way onto axle
until it locks to place.
WARNING!
Pull wheel hub towards you to be sure the wheel is securely attached. Repeat the
procedure on each of the four wheels.
If you need to in
fl
ate the tyres, use an air pump with an adapter for cars.
The allowable air pressure for the tires is 1.5 to a maximum of 1.8 bar.
The tyres are assembled by hand. If the stroller rolls unevenly, this can easily be adjusted (de-
fl
ate the tyres a little and adjust the tyre into correct position).
Through depletion of the Ozone layer and an increase in the UV radiation, the tyres could get
small dry cracks appearing. This does not affect the driving of Britton
®
strollers, and Britton
®
will
not be responsible for complaints resulting from this matter.
WARNING!
To avoid a puncture, don’t drive over sharp edges or broken glass.
WARNING!
To achieve optimal driving conditions and to avoid a
fl
at tyre, the air pressure
should be correct. Please check the air pressure on a frequent basis.
EN
