ENGLISH
USER MANUAL
BRITEQ
®
1/9
EXPO CANNON
OPERATION MANUAL
Thank you for buying this Briteq
®
product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
•
This very powerful projector is the perfect choice for big showrooms and exhibition booths.
•
Very effective for use in car showrooms!
•
The 37pcs 10W Cold white (6500K) CREE LEDs produce an extremely powerful 20° beam.
(Different beam angle available on special demand)
•
Very high CRI >85, important for perfect color rendering!
•
Stand alone:
simply set the dimmer level and you’re ready.
•
DMX-control:
with any simple DMX-controller you can easily set the individual dimmer levels on all the
projectors in the DMX-line.
•
1CH mode:
dimmer 0
– 100%
•
2CH mode:
dimmer 0
– 100% + strobe 0 – 20Hz
•
Can be used as powerful, directional LED-strobe!
•
Thanks to the low power consumption, only 380W at maximum output, a lot of money can be saved on the
electricity bill while preserving nature!
•
Silent operat
ion, thanks to the temperature controlled “low airstream” cooling system.
•
High contrast OLED-display for easy menu navigation
•
Flicker free TV-recordings thanks to 3.6kHz LED refresh rate!
•
The lamp behavior can be continuously adjusted from led to halogen.
•
Four dimmer curves: linear, square, inverse square, S-curve
•
In case of DMX failure you can choose between blackout and freeze mode.
•
RDM-
functionality for easy remote setup: DMX addressing, channel mode, …
•
Lock function to avoid unwanted altering of the settings.
•
Default factory se user settings can be saved/loaded.
•
3pin DMX in/o Neutrik PowerCON in/outputs for easy daisy chaining.
•
Extruded black anodized aluminum housing, equipped with a very strong bracket
•
Frost filter and barn doors included
BEFORE USE
•
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
•
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the packing contains the following items:
•
Operating instructions
•
EXPO CANNON
•
Four-leaf barndoor
•
Frost filter
•
PowerCon
®
mains cable
