Briteq COB SLIM IOO-RGB, Руководство по эксплуатации, Страница: 5 / 72

ENGLISH OPERATION MANUAL
BRITEQ
®
3/67 COB SLIM100-RGB
DESCRIPTION:
PROJECTOR
1. IR-RECEIVER: receives the commands from the included IR-remote.
2. HANGING BRACKET: with a knob on both sides to fasten the unit in the desired position. you can use
the hole in the center of the bracket to fix a hook or truss clamp. As this is a double bracket, you can also
use the projector as a floor projector.
3. USB 5Vdc output:
this is NOT a data connector, it’s only a 5Vdc/350mA output that can be used to
supply power to future accessories.
4. MAINS FUSE: th
is fuse only protects the electronics of the projector. It doesn’t protect the mains output
(8). Always replace the fuse by a 100% identical one. (T 1A / 250V)
5. EARTH CONNECTOR: You can use this connector when the setup requires an extra earth connection
6. DMX INPUT: Can be used to connect the projector to the DMX output of the previous projector in the
DMX line or to a DMX controller.
7. POWER INPUT: with PowerCON
®
socket. Connect the supplied mains cable here.
8. POWER OUTPUT: Can be used to power you next projector. Maximum power for the total power line:
10A (2300W).
9. DMX OUTPUT: Connect it to the DMX input of the next projector in the line.
Hint: Please check our website for special cable assemblies that contain both power (3x1.5mm² with Neutrik
PowerCON
®
) and balanced signal (XLR 3pin) in one cable. Different lengths are available: 1.3m, 3m, 5m and
10m, very convenient!
10. NARROW BEAM LENS: with this lens in front of the projector you will obtain a narrow beam. If you want
the projector to project a very wide beam, just unscrew both screws and remove the lens.
11. DISPLAY: shows the various menus and the selected functions:
12. MENU-button: used to browse the different menu options or to exit a menu option.
13. ENTER-button: used to select a menu option or confirm a setting.
14. UP-button: used to go to the previous menu option or to increase a parameter value.
15. DOWN-button: used to go to the next menu option or to decrease a parameter value.