Briteq COB SLIM IOO-RGB, Руководство по эксплуатации, Страница: 14 / 72

ENGLISH OPERATION MANUAL
BRITEQ
®
12/67 COB SLIM100-RGB
6 channel DMX-Mode:
Channel: Value: Function: Remarks
1 000-255 Master dimmer (0-100%)
2
000-007 No strobe (open)
008-037 Random Strobe
038-067 Sound Strobe
068-255 Strobe
Increasing speed: 068=slow ~ 255=fast
3
000-007 No function
Channels 4+5+6 are active
008-247 Color fade effect
Increasing speed: 008= very slow ~ 247=fast
248-255 Sound Chase
4 000-255 Red (0-100%)
Not used while CH3 = 008 ~ 255
5 000-255 Green (0-100%)
Not used while CH3 = 008 ~ 255
6 000-255 Blue (0-100%)
Not used while CH3 = 008 ~ 255
MAINTENANCE

Make sure the area below the installation place is free from unwanted persons during servicing.

Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:

All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.

Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.

When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.

The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.

In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.

Clean with a soft cloth using normal glass cleaning products.

Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified technician!
SPECIFICATIONS
Mains Input: 100-240Vac, 50/60Hz
Power consumption: 120 Watt (full on)
Power connections: Neutrik
®
PowerCON
®
- 16A Power linking capacity
Fuse: 250V 1A slow blow (20mm glass)
Sound Control: Internal microphone
DMX connections: XLR 3pin
DMX modes: 3, 4LC, 4+ and 6 Channels
LEDs: 100W COB RGB LED
Beam angle without lens: +/- 70° (field angle = 120°)
Beam angle with lens: +/- 15° (field angle = 25°)
LED Refresh rate: 1200Hz (Video proof)
Size: 245x280x140mm
Weight: 3,46 kg
The information might be modified without prior notice
You can download the latest version of this user manual on our website: www.briteq-lighting.com