Briteq BTX-Cirrus, Руководство по эксплуатации

Страница: 11 / 21

ENGLISH OPERATION MANUAL
BRITEQ
®
9/18 BTX-CIRRUS
Used to set the desired input for the DMX signal:
•
Wired Input: XLR (3 or 5pin) input is used.
•
Wireless Input: DMX-signal comes from an external wireless transmitter (sold separately)
•
Wireless Input / XLR out: DMX-signal comes from an external wireless transmitter (sold separately).
The wireless DMX-signal is also available at the DMX output port (3 or 5 pins) for further daisy chaining
of other equipment.
Important Remark: originally this projector is NOT equipped with a wireless receiver module. A wireless
receiver module is optionally available.
PERSONALITY
SCREEN
Brightness
Set the brightness of the screen
Screen time
Set a delay from 0 to 10 minutes to automatically exit the menu interface and switch the screen off.
Touch screen (on-off)
•
On: The touchscreen is active
•
Off: The touchscreen is not active, menu navigation is only possible using the buttons.
Auto screen (on-off)
•
On: the screen is automatically rotated, based on the angle of the BriteQ BTX-CIRRUS.
•
Off: the screenhe orientation is fixed
PERSONALITY FAN MODE
•
Auto: the speed of the fan is controlled by the temperature
•
High: the fan is continuously on at high speed (for use in very warm environments)
MANUAL CONTROL RESET
Reset All: Reset all functions of the BriteQ BTX-CIRRUS
Reset pan/tilt: Reset pan and tilt
Reset other: Reset all other functions
MANUAL CONTROL CHANNEL
Change the value for each channel manually. This is an easy way to quickly test the machine without any
DMX console.
ADVANCED CALIBRATION
Calibration of the 14 integrated motors. Values can be set from 001 to 255.
Calibration password is
“0088”.
ADVANCED FACTORY DEFAULT
Return to the factory default settings.
ADVANCED TOUCH CALIBRATION
Recalibrate the touchscreen by pressing the red cross on the screen.