Briteq BTX-Cirrus, Руководство по эксплуатации

Страница: 10 / 21

ENGLISH OPERATION MANUAL
BRITEQ
®
8/18 BTX-CIRRUS
Advanced
Control
Calibration Chanel Adgusting
Factory Default Reset to orignal parameters
Touch Calibration Touch screen adjusting
SET UP DMX ADDRESS
Set the DMX address by pressing the center of the screen at least 2 seconds (yellow progress bar appears
on the screen) and DMX Address panel appears. DMX address can be modified with the slider on the touch
screen or with the “+” and “-“ button. The “>>” icon set the last DMX address possible according to the
selected channel mode. The “<<” set the address to 1. Set the DMX address by pessing enter. The main
page is now updated, and the DMX range used by the product is on the right down corner of the screen.
SET UP CHANNEL MODE
Set the channel mode of BriteQ BTX-CIRRUS:
•
Standard: 20 Channels
•
Shapes: 29 Channels
•
Extended: 77 Channels
•
Extended RGBW: 96 Channels
•
Full : 86 Channels
•
Extended Dimmer : 48 Channels
SET UP FIXTURE ID
The Fixture id (ranging from 0001 to 9999) makes installation easier because each product can be identified
by a unique number. With the internal battery, no need to plug the power to set or read the fixture id.
To change the fixture id a password is needed: the password is “1702”.
INFORMATION FIXTURE TIMES
Shows the operation time (in hours) since it first start.
INFORMATION LED TIMES
Led on times: Show the total hours with led on since it first start
Reset LED time: Reset the total hours with led on.
Should be done after changing the led.
INFORMATION ERROR LIST
If an error is detected, a list of error(s) will appear here.
By default, without any error: “no error”.
INFORMATION DIAGNOSIS
Show the state of each cards. If one of the electronic card is not at 100%, contact the technical support.
INFORMATION
DMX VALUE
Shows the DMX value received by the Briteq BTX-CIRRUS on the DMX input. It can be used as a DMX
analyzer to check the values received.
INFORMATION FAN MONITOR
Shows the rotation speed of the fans. Speed in rotations per minute.
PERSONALITY PAN TILT
Pan reverse (on-off)
•
On: Pan works in opposite direction
•
Off: Pan works normally
Tilt reverse (on-off)
•
On: Tilt works in opposite direction
•
Off: Tilt works normally
Feedback (on-off)
•
On: pan/tilt position is automatically corrected.
•
Off: pan/tilt position is not corrected.
PERSONALITY DMX INPUT