BriteLyt Rapid 829/500CP 9
Step 3
Place mantle over spray
nozzle and tie on using a
double knot.
Trim loose threads as short
as possible.
Step 4
Re-Install the hood inner
casing and the hood/cover.
Ensure that the regulator
screw is visible and tight-
ened.
Re-install the two mounting
screws and re-tighten the
handle/reflector screws by
hand once hood is replaced.
Step 5
Ensure that the pointer
on the fuel dial is pointing
upright to 12 O’clock (This is
the off position).
Screw the pressure gauge
back onto the tank by hand.
