Instructions for Installation & Use - Series No. 8100/A/2013
Instructions for Installation & Use - Series No. 8100/A/2013
68
69
Extension Strap distance to be measured.
Length 300mm (Use Britax Safe-n-Sound part 0035).
Length 600mm (Use Britax Safe-n-Sound part 0036).
Available from all major child restraint retailers.
Adjustable upper
Anchorage strap.
Front of Vehicle
45
°
INSTALLATION OF CAR UPPER
ANCHORAGE POINT
INSTALLATION OF CAR UPPER
ANCHORAGE POINT
Measure distance
from restraint upper
anchorage attachment
clip to the car anchor
fitting.
The shaded areas of this diagram illustrate the possible locations of the upper anchorage point (car anchor
fitting). Within each shaded area is an upper anchorage point showing the correct way to install the fitting.
Ensure the upper anchorage point is aligned as illustrated unless stated otherwise in the vehicle owner’s
handbook.
Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage points and the
possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If
anchorage points cannot be found refer to car manufacturer or local child restraint fitting station or traffic
authority for optimum position of upper anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical panel can only be installed in one way.
Please refer to vehicle owner’s handbook or a child restraint fitting station for correct method.
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
UPPER ANCHORAGE POINT. ALWAYS ENSURE THAT THE ATTACHMENT
CLIP IS CORRECTLY ENGAGED TO THE UPPER ANCHORAGE POINT AND
NOT HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF
THE RESTRAINT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS
STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED
PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT:
