Instructions for Installation & Use - Series No. 8100/A/2013
Instructions for Installation & Use - Series No. 8100/A/2013
46
47
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
CHILD HARNESS PREPARATION
CHILD HARNESS PREPARATION
INSTALLING SAFE-N-SOUND PROTECTA PLUS™ HARNESS WITH
EXTENSION STRAP INTO VEHICLE
An adjustable extension strap is supplied with the Child Harness. Hook the Safe-n-Sound Protecta
PLUS™ Harness clip first onto the extension strap catch, then hook the extension strap clip onto the
VERSATETHER™ Catch on the Booster Seat top tether strap as shown below. Ensure that none of the
straps are twisted or catching on sharp edges. Adjust the Booster Seat top tether strap (refer to page 24)
first then remove excess slack from the extension strap by pulling the adjuster strap as illustrated below.
Always attach the hook and remove the slack.
Pull to
remove
slack
Attachment Clip attaches to
the
VERSA
TETHER™
Catch
To lengthen the Adjustable Extension strap
rotate the adjuster and pull the main strap.
Pull to remove
slack
Pull to
lengthen
Rotate the
Adjuster to
lengthen
INSTALLING CHILD HARNESS INTO SEAT
A. Lengthen the Child Harness using the adjuster under the cover (see the Child Harness instructions for
the adjustment method). Press the Adjuster button (1) and pull the shoulder strap (2).
Feed left hand
Harness Strap
& Cross Strap
through right
hand slot.
Child Harness
under the cross bar.
Left hand Strap
Adjuster under cover
Attachment Clip
Cross Strap
2
1
B. Feed the left hand Harness Strap & Cross
Strap through the shoulder slots that are just
above the child's shoulders. Make sure that
the Attachment Clip also feeds through to the
back of the restraint.
