Instructions for Installation & Use - Series No. 8100/A/2013
Instructions for Installation & Use - Series No. 8100/A/2013
36
37
HOW TO SET-UP
HOW TO SET-UP
ADJUSTING THE SLIDEGUARD™ CLIP POSITION
F. Remove SLIDEGUARD™ clip from storage recess and engage
into harness buckle.
G. Adjust the crotch strap length if necessary. See page 38.
H. Replace cover and re-attach elastic loops at the front of the
cover to the child seat.
I. Extend and roll up the harness adjustment strap and metal
strap connector, then store inside the recline foot.
J. Store shoulder pads (if fitted) in a safe place, for future use.
Store metal connector in recline
foot
I
F
Click
Remove SLIDEGUARD™
clip and engage in harness
buckle.
The SLIDEGUARD™ Clip ensures that the child does not slump and ensures the lap belt is always
positioned on the child’s hips and thighs. If the seat belt rides up onto the stomach then a child can be
seriously injured in a crash. To adjust buckle height, see page 38. You must adjust the crotch strap
to the correct length for your child before installing the restraint as it cannot be adjusted with the child
seated.
The crotch strap should only be extended if the buckle and SLIDEGUARD™ Clip are located too low
against your child's legs, causing discomfort.
Always return the crotch strap to its original shorter length when using the seat with a smaller child.
The buckle and SLIDEGUARD™Clip should always be positioned low down on your child's body.
IMPORTANT:
A. Sit the restraint against a wall for stability and get the child to sit comfortably in position.
B. Determine the correct buckle position. The centre of the buckle needs to be level with the top of the
legs.
Center of buckle button,
level with top of legs,
all slack removed from
crotch strap.
SLIDEGUARD™ Clip
Position
TOO HIGH
SLIDEGUARD™
Clip Position
OK
C. Remove the child and adjust the buckle strap length as on page 38.
CHILD USE
(BOOSTER SE
AT
MODE)
CHILD USE
(BOOSTER SE
AT
MODE)
IMPORTANT: ALWAYS USE THE SLIDEGUARD™ CLIP
