Instructions for Installation & Use
- Series No. BS8100A-020133
50
HOWTOINSTALLCHILDHARNESS
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
NOTE:
Some vehicle seatbelts are too short and you may experience some difficulty fitting the
converted lap-sash around your child. If so, adjust the gated slide nearer to your child, ideally under the
armrest and lap belt recess area (ensure the slide does not touch your child). This should provide more
belt length to fit your child, but if the belt still will not fit, try another location in the vehicle. If the vehicle
belts are still too short, then contact the vehicle manufacturer for advice on longer seatbelts.
INSTALLATIONMETHOD
If the seating position has a lap only seat belt then no other vehicle seatbelt preparation is required.
If the seating position has a lap-sash seatbelt then it
MUST
be converted into a lap belt by fitting a Gated 3 bar
slide, see page 51.
The top tether must be correctly fitted for all installations.
IMPORTANT:
The SecureGuard™ Device
MUSTALWAYS
be used when the child is using the booster seat with
the child harness as it ensures the lap belt is correctly positioned on the child's hips.
A loose or poorly positioned lap belt can move up into the abdomen and cause serious injuries in a
crash.
CAUTION:
ALWAYS FOLLOW THE CHILD HARNESS INSTRUCTIONS.
