Instructions for Installation & Use
- Series No. BS8100A-020133
71
INSTALLATIONOFCARUPPER
ANCHORAGEPOINT
ONLY USE A 5/16 UNC GRADE 5 BOLT. IF THE BOLT IS
NOT THE CORRECT LENGTH THE CAR MANUFACTURER’S
HAND BOOK CAN PROVIDE ADVICE ON THE CORRECT
LENGTH BOLT.
NOTE: Marking on
the top of a Grade 5
Bolt. Do not use any bolt
without these marks.
Front of Vehicle
CHILD RESTRAINTS MUST NOT BE ATTACHED TO
UNSOUND METAL OR TO WOOD, OR SYNTHETIC
STRUCTURES. WHEN DRILLING 9 MM HOLE DO NOT
DRILL THROUGH FUEL LINES, FUEL TANKS, ELECTRICAL
WIRING, OR RADIO SPEAKERS.
WEBBING STRAPS MUST BE PROTECTED FROM SHARP
CORNERS AND EDGES. THE ANCHOR FITTING MUST BE
USED ONLY AS DESCRIBED ABOVE. IT MUST NOT BE
HOOKED ONTO ANY OTHER OBJECT.
Centre line of
seating position
CARINSTALLATIONACCESSORIES
(FromretailersofBritaxSafe-n-Soundproducts)
EXTRA ANCHOR KITS: Available for using the restraint in additional cars.
Re-order no: 0038
EXTENSION STRAPS: May be required for cars without a fixed parcel shelf.
Re-order no: 0035 (length 300mm) or
0036 (length 600mm)
200mm
min.
Fig.3.
