Instructions for Installation & Use
- Series No. BS8100A-020133
37
HOWTOSET-UP
ADJUSTINGTHESECUREGUARD™DEVICEPOSITION
The SecureGuard™ Device ensures that the child does not slump and ensures the lap belt is always
positioned on the child’s hips and thighs. If the seat belt rides up onto the stomach then a child can be
seriously injured in a crash. To adjust buckle height, see page 38. You must adjust the crotch strap
to the correct length for your child before installing the restraint as it cannot be adjusted with the child
seated.
The crotch strap should only be extended if the buckle and SecureGuard™ Device are located too low
against your child's legs, causing discomfort.
Always return the crotch strap to its original shorter length when using the seat with a smaller child.
The buckle and SecureGuard™ Device should always be positioned low down on your child's body.
IMPORTANT:
A. Sit the restraint against a wall for stability and get the child to sit comfortably in position.
B. Determine the correct buckle position. The centre of the buckle needs to be level with the top of the
legs.
Center of buckle button,
level with top of legs,
all slack removed from
crotch strap.
SecureGuard™
Device Position
TOOHIGH
SecureGuard™
Device Position
OK
C. Remove the child and adjust the buckle strap length as on page 38.
CHILD USE
(BOOSTER SE
AT
MODE)
IMPORTANT: ALWAYS USE THE SECUREGUARD™ DEVICE
