Instructions for Installation & Use
Instructions for Installation & Use
88
89
CARE & MAINTENANCE
CARE & MAINTENANCE
TO REPLACE COVER:
A. Feed the harness tongues and shoulder straps through
the side slots in the cover.
B. Stretch the cover over the top of the restraint first, then
the sides, then stretch the cover around the rim of the
restraint. Attach the elastic loops at the top of the cover
located at the back of the restraint and the elastic loops
at the bottom of the restraint located under the front of
the restraint. Re-attach and press studs to the moulding.
Feed the crotch buckle through slot in cover.
If fitted with SICT™- replace plastic flaps into the slots on
both sides of the cover (next to air cushion).
C. Pull the adjuster strap through the cover. Ensure none of
the harness straps are twisted.
Replace
plastic flaps
on both
sides of
restraint
Hook elastic loop at the back of
the restraint
To replace headrest cover for adjustable headrest with
side wings:
Lift headrest cover over headrest, place elastic loops behind
headrest and clip press studs together next to shoulder
harness.
Refit the padded insert (if supplied) or other accessories if
required. If the headrest has moved reset the headrest so
the shoulder straps are positioned correctly for the child.
See page 45 for Rearward Facing and page 71 for Forward
facing.
Press
Studs
TO REPLACE SHOULDER STRAPS:
If the harness straps have been removed from the metal
strap connector.
A. Refit the harness strap by feeding through the previous
shoulder strap slots in the headrest.
You MUST thread
the shoulder strap OVER cross bar
and then re-attach
the straps to metal strap connector at the back of
the seat (as shown here). Check that the straps are
connected and none of the harness straps are twisted.
B. Refit any cover trims and/or accessories as per their
instructions.
Metal Strap Connector
Cross Bar
ONLY USE BRITAX SAFE-N-SOUND SEAT COVERS AND
ACCESSORIES THAT ARE DESIGNED AND TESTED FOR USE
WITH THIS PRODUCT.
VERY IMPORTANT:
Only replace the cover with Safe-n-Sound supplied
replacement cover with identical shoulder
height markers or a replacement cover meeting
AS/NZS 8005.
