Instructions for Installation & Use
Instructions for Installation & Use
90
91
CARE & MAINTENANCE
CARE & MAINTENANCE
To replace headrest cover for adjustable headrest
with side wings:
Lift headrest cover over headrest, place elastic loops
behind headrest and clip press studs together next to
shoulder harness.
Refit the padded insert (if supplied) or other accessories
if required. If the headrest has moved reset the headrest
so the shoulder straps are positioned correctly for the
child. See page 45 for Rearward Facing and page 71 for
Forward facing.
ONLY USE BRITAX SAFE-N-SOUND SEAT COVERS AND
ACCESSORIES THAT ARE DESIGNED AND TESTED FOR USE
WITH THIS PRODUCT.
VERY IMPORTANT:
Only replace the cover with Safe-n-Sound supplied
replacement cover with identical shoulder
height markers or a replacement cover meeting
AS/NZS 8005.
TO REPLACE SHOULDER STRAPS:
If the harness straps have been removed from the metal
strap connector.
A. Refit the harness strap by feeding through the previous
shoulder strap slots in the headrest.
You MUST thread
the shoulder strap OVER cross bar
and then re-attach
the straps to metal strap connector at the back of
the seat (as shown here). Check that the straps are
connected and none of the harness straps are twisted.
B. Refit any cover trims and/or accessories as per their
instructions.
Metal Strap Connector
Cross Bar
Alternative headrest cover with soft wings:
Lift headrest cover over headrest without side wings whilst
feeding through the lever. Re-attach the press studs on
the headrest without side wings moulding. Feed through
shoulder harness straps. Clip together press studs next to
shoulder harness.
Press stud from
moulding
Press
Studs
Press
Studs
